Health, Safety and Environment

OSHA 10 Hour and 30 hour training

OSHA 10 and OSHA 30 online courses, certification and cards for meeting OSHA standards for construction and general industry training requirements

OSHA 10 Hour 30 Hour Online

OSHA’s 10 Hour and 30 Hour training curricula have always been the gold standard for the safety and regulatory compliance training for employees to provide them the grounding they require in the areas that OSHA mandates.

The complete training libraries for both General Industry and Construction are equivalent to OSHA’s 10 Hour and 30 Hour General Industry and Construction curricula.

All of the topics in these libraries are available as online (SCORM) courses and Video OnDemand (VOD) programs that can be taken over the internet, as well as DVDs that can be played locally at any facility worldwide. The interactive courses typically take an employee 45 minutes to 1 hour to complete. VOD and DVD courses have been designed to be used in classroom training sessions of 45 minutes to 1 hour in length.

Employees who complete the curricula will receive a wallet card verifying that they have been trained on the topics that the OSHA curricula recommends.

A full line of DVD Training Kits, Employee Booklets, and Posters covering more than 100 other Safety and Regulatory Compliance topics are also available which include Compliance Manuals with fill-in-the-blank written compliance programs.

Formats: Web-based E-learning / DVD

OSHA's 10-hour General Industry

OSHA TOPICS
Mandatory Courses (7 Hours)
GTS EQUIVALENT COURSES
Mandatory Courses (7 Hours)
  • Introduction to OSHA
  • Introduction to OSHA
  • Safety Orientation
  • Walking and Working Surfaces
  • Walking and Working Surfaces
  • Fall Protection
  • Exit Routes, Emergency Action Plans, Fire Prevention Plans and Fire Protection
  • Emergency Planning
  • Industrial Fire Prevention
  • Evacuation Procedures
  • Electrical
  • Electrical Safety
  • Personal Protective Equipment
  • Personal Protective Equipment
  • Hazard Communication
  • Hazard Communication Industrial Facilities
OSHA TOPICS
Elective Courses (3 Hours)
GTS EQUIVALENT COURSES
Elective Courses (3 Hours)
  • Hazardous Materials
  • Hazardous Materials Labels
  • Dealing with Hazardous Spills
  • Materials Handling
     
  • Materials Handling Safety
  • Warehouse Safety
  • Machine Guarding
  • Machine Guarding Safety
  • Introduction to Industrial Hygiene
  • No comparable course
  • Bloodborne Pathogens
  • Bloodborne Pathogens in Commercial and Industrial Facilities
  • Ergonomics
  • Industrial Ergonomics
  • Office Ergonomics
  • Safety and Health Programs
  • I2P2 (Injury and Illness Prevention Programs)
  • Fall Protection
  • Fall Protection
Optional Courses (1 Hour) Optional Courses (1 Hour)
  • Courses on General Industry Hazards or Policies not covered by mandatory or elective courses, or additional courses on mandatory or elective topics
  • Any other courses from GTS library

OSHA's 30-hour General Industry

OSHA TOPICS
Mandatory Courses (13 Hours)
GTS EQUIVALENT COURSES
Mandatory Courses (13 Hours)
  • Introduction to OSHA
  • Introduction to OSHA
  • Safety Orientation
  • Managing Safety and Health
  • Safety Housekeeping and Accident Prevention
  • Safety Audits
  • Hazard Recognition
  • Accident Investigation
  • Walking and Working Surfaces
  • Walking and Working Surfaces
  • Fall Protection
  • Exit Routes, Emergency Action Plans, Fire Prevention Plans and Fire Protection
  • Emergency Planning
  • Industrial Fire Prevention
  • Evacuation Procedures
  • Electrical
  • Electrical Safety
  • Electrocution Hazards in Construction Environments Part I: Types of Hazards and How You Can Protect Yourself
  • Personal Protective Equipment
  • Personal Protective Equipment
  • Materials Handling
  • Materials Handling Safety
  • Warehouse Safety
  • Hazard Communication
  • Hazard Communication in Industrial Facilities
OSHA TOPICS
Elective Courses (10 Hours)
GTS EQUIVALENT COURSES
Elective Courses (10 Hours)
  • Hazardous Materials (Flammable and Combustible Liquids, Spray finishing, compressed gases, dipping and coating operations)
  • Introduction to GHS (The Globally Harmonized System)
  • Hazardous Materials Labels
  • Dealing with Hazardous Spills
  • Compressed Gas Cylinders
  • Permit-Required Confined Spaces
     
  • Confined Space Entry
  • Lock-Out/Tag-Out
  • Lock-Out/Tag-Out
  • Machine Guarding
  • Machine Guard Safety
  • Welding, Cutting, Brazing
  • Welding Safety
  • Hot Work Safety and The Permitting Process
  • Introduction to Industrial Hygiene
  • No comparable Courses
  • Bloodborne Pathogens
  • Bloodborne Pathogens in Commercial and Industrial Facilities
  • Ergonomics
  • Industrial Ergonomics
  • Office Ergonomics
  • Fall Protection
  • Fall Protection
  • Safety and Health Programs
  • I2P2 (Injury and Illness Prevention Programs)
  • Powered Industrial Vehicles
  • Forklift/Powered Industrial Truck Safety
  • Forklift Safety: Industrial Counterbalance Lift Trucks
OSHA TOPICS
Optional Courses (7 Hours)
GTS EQUIVALENT COURSES
Optional Courses (7 Hours)
  • Courses on General Industry Hazards or Policies not covered by mandatory or elective courses, or additional courses on mandatory or elective topics
  • Any other courses from GTS library

OSHA's 10-hour Construction Industry

OSHA TOPICS
Mandatory Courses (7 Hours)
GTS EQUIVALENT COURSES
Mandatory Courses (7 Hours)
  • Introduction to OSHA
  • Introduction to OSHA
  • Safety Orientation in Construction Environments
OSHA TOPICS
OSHA "Focus Four" Hazards (4 Hours)
GTS EQUIVALENT COURSES
OSHA "Focus Four" Hazards (4 Hours)
  • Falls
  • Fall Protection in Construction Environments
  • Electrocution
     
  • Electrocution Hazards Part I: Worksite Safety
  • Struck-By
  • Struck-By Hazards in Construction Environments
  • Caught-In or Between
  • Caught-In/Between Hazards in Construction Environments
  • Personal Protective and Life Saving Equipment
  • Personal Protective Equipment in Construction Environments
  • Health Hazards in Construction
  • Hazard Communication in Construction Environments
OSHA TOPICS
Elective Courses (2 Hours)
GTS EQUIVALENT COURSES
Elective Courses (2 Hours)
  • Cranes, Derricks, Hoists, Elevators and Conveyors
  • Crane Safety in Construction Environments
  • Rigging Safety in Construction Environments
  • Excavations
     
  • Trenching and Shoring Safety in Construction Environments
  • Materials Handling, Storage, Use and Disposal
  • Materials Handling Safety
  • Dealing with Hazardous Spills
  • Scaffolds
  • Suspended Scaffolding Safety in Construction Environments
  • Supported Scaffolding Safety in Construction Environments
  • Stairways and Ladders
  • Ladder Safety in Construction Environments
  • Tools - Hand and Power
  • Hand and Power Tool Safety in Construction Environments
OSHA TOPICS
Optional Courses (1 Hour)
GTS EQUIVALENT COURSES
Optional Courses (1 Hour)
  • Courses on General Industry Hazards or Policies not covered by mandatory or elective courses, or additional courses on mandatory or elective topics
  • Any other construction or construction-related courses from GTS library

*Courses are available online in Interactive SCORM and Video-On-Demand (VOD) formats. The interactive courses typically take an employee 45 minutes to 1 hour to complete. VOD and DVD courses are meant to be used in classroom training sessions of 45 minutes to 1 hour in length.

OSHA's 30-hour Construction Industry

OSHA TOPICS
Mandatory Courses (15 Hours)
GTS EQUIVALENT COURSES
Mandatory Courses (15 Hours)
  • Introduction to OSHA
  • Introduction to OSHA
  • Safety Orientation in Construction Environments
  • Managing Safety and Health
  • Safety Housekeeping and Accident Prevention
  • Safety Audits
  • Hazard Recognition
  • Accident Investigation
OSHA TOPICS
OSHA "Focus Four" Hazards (6 Hours)
GTS EQUIVALENT COURSES
OSHA "Focus Four" Hazards (6 Hours)
  • Falls
  • Fall Protection
  • Slips, Trips and Falls
  • Electrocution
  • Electrocution Hazards Part II: Employer Responsibilities
  • Electrocution Hazards Part I: Worksite Safety
  • Struck-By
  • Struck-By Hazards in Construction Environments
  • Caught-In or Between
  • Caught-In/Between Hazards in Construction Environments
  • Personal Protective and Life Saving Equipment
  • Personal Protective Equipment in Construction Environments
  • Hand, Wrist and Finger Safety in Construction Environments
  • Respiratory Protection and Safety
  • Health Hazards in Construction
  • Hazard Communication Construction Environments
  • Hearing Conservation and Safety
OSHA TOPICS
Elective Courses (12 Hours)
GTS EQUIVALENT COURSES
Elective Courses (12 Hours)
  • Cranes, Derricks, Hoists, Elevators and Conveyors
  • Crane Safety in Construction Environments
  • Rigging Safety in Construction Environments
  • Aerial Lifts in Industrial and Construction Environments
  • Scissor Lifts in Industrial and Construction Environments
  • Confined Space Entry
  • Confined Space Entry
  • Ergonomics
  • Industrial Ergonomics
  • Excavations
  • Trenching and Shoring Safety in Construction Environments
  • Fire Protection and Prevention
  • Industrial Fire Prevention
  • Using Fire Extinguishers
  • Fire Prevention in the Office
  • Materials Handling, Storage, Use and Disposal
  • Materials Handling Safety
  • Dealing with Hazardous Spills
  • Motor Vehicles; Mechanized Equipment and Marine Operations; Rollover Protective Structures and Overhead Protection; Signs, Signals and Barricades
  • Driving Safety
  • Aerial Lifts in Industrial and Construction Environments
  • Scissor Lifts in Industrial and Construction Environments
  • Hazardous Materials Labels
  • Powered Industrial Vehicles
  • Forklift/Powered Industrial Truck Safety
  • Forklift Safety: Industrial Counterbalance Lift Trucks
  • Safety and Health Programs
  • I2P2 (Injury and Illness Prevention Programs)
  • Scaffolds
  • Suspended Scaffolding Safety in Construction Environments
  • Supported Scaffolding Safety in Construction Environments
  • Tools - Hand and Power
  • Hand and Power Tool Safety in Construction Environments
OSHA TOPICS
Optional Courses (1 Hour)
GTS EQUIVALENT COURSES
Optional Courses (1 Hour)
  • Courses on General Industry Hazards or Policies not covered by mandatory or elective courses, or additional courses on mandatory or elective topics
  • Any other construction or construction related courses from GTS library

*Courses are available online in Interactive SCORM and Video-On-Demand (VOD) formats. The interactive courses typically take an employee 45 minutes to 1 hour to complete. VOD and DVD courses are meant to be used in classroom training sessions of 45 minutes to 1 hour in length.