Fall Safety and Working at Heights

Duration: 0.75 Hrs

Course Level: Intermediate
Languages: English
Capability: Audio, Video, MobileReady

Vehicle-mounted elevating and rotating work platforms (also called aerial lifts, aerial devices, and bucket trucks) can provide temporary elevated workspaces as an alternative to ladders or scaffolding. This interactive online course will list the types and categories of vehicle-mounted aerial devices (VMADs) and their main components, discuss safe work practices when working with VMADs, requirements for owners, users, and operators, as well as inspection requirements for VMADs.

Learning Objectives

By the end of this course, you will be able to:

• Identify the types and main components of Vehicle-Mounted Elevating and Rotating Work Platforms (or aerial devices)
• Describe the equipment design and control requirements for vehicle-mounted aerial devices in ANSI and CSA Standards
• Describe the difference between “gloving” and “bare-hand” electrical work
• Describe the 5 categories (A through E) of vehicle-mounted aerial devices
• Identify the main hazards associated with using an aerial device
• List safe work practices for aerial devices
• List the requirements for owners, users, and operators of vehicle-mounted aerial devices
• Describe the inspection requirements for vehicle-mounted aerial devices

Duration: 1.00 Hr

Course Level: Intermediate
Languages: English
Capability: Audio, Video, MobileReady

Working from ladders, scaffolding, and other elevated work platforms presents a serious danger of falling. Falls can be caused by inattentiveness, slippery surfaces, working in awkward or out-of-balance positions, or insufficient training. This course highlights numerous methods of prevention and protection, including fall arrest systems, vertical and horizontal lifelines, as well as inspection and maintenance guidelines. This course also discusses associated topics such as the proper procedure for putting on a body harness, lifeline swing hazards, calculating fall space clearance, and harness suspension syndrome. Regulations: OSHA 1926 Subpart M (1926.500 -503)

Learning Objectives

By the end of this course, you will be able to:

• Identify and describe types of fall protection systems, including best practices for their use
• Describe general safety rules for using ladders
• Describe fall protection for scaffolding
• List, in order, the steps to put on a body harness
• Identify and describe different types of lanyards
• Describe different types of anchorage points
• Describe vertical and horizontal lifelines
• List calculation factors for determining fall space clearance
• List emergency action plan steps in the event of a fall
• List inspecting and maintenance guidelines for fall protection systems
• List fall protection use guidelines in lift equipment

Duration: 0.75 Hrs

Course Level: Intermediate
Languages: English
Capability: Audio, Video

Mobile Elevating Work Platforms (MEWPs) can provide temporary elevated workspaces as an alternative to ladders or scaffolding. Due to the potential hazards of working at height, the American National Standards Institute (ANSI) and Canadian Standards Association (CSA) have developed standards related to MEWP design, construction, and use. This course covers the 2018 ANSI A92 and CSA B354 standards for MEWP operators and occupants. It covers MEWP Group and Type designations, as well as MEWP design, use, and training requirements.

Learning Objectives

• Identify the main components of a mobile elevating work platform (MEWP)
• Describe ANSI A92 and CSA B354 Standard equipment design requirements for MEWPs
• Identify MEWP Groups and Types, as defined in ANSI A92 and CSA B354 Standards
• Identify the main hazards related to MEWP use
• List safe work practices for MEWPs
• List the required elements of a Safe Use Plan, including the site risk assessment and rescue plan
• Identify the required training for MEWP operators and occupants
• Describe the inspection and recordkeeping requirements for MEWPs

Duration: 0.75 Hrs

Course Level: Intermediate
Languages: English, French, Spanish
Capability: Audio, Video

Mobile Elevating Work Platforms (MEWPs) can provide temporary elevated workspaces as an alternative to ladders or scaffolding. Due to the potential hazards of working at height, the American National Standards Institute (ANSI) and Canadian Standards Association (CSA) have developed standards related to MEWP design, construction, and use. This course covers the 2018 ANSI A92 and CSA B354 standards for supervisors of MEWP operators. It covers the latest MEWP Group and Type designations, and updated design, use, and training requirements.

Learning Objectives

At the end of this course, you will be able to:

• Identify the main components of a mobile elevating work platform (MEWP)
• Describe ANSI A92 and CSA B354 Standard equipment design requirements for MEWPs
• Identify MEWP Groups and Types, as defined in ANSI A92 and CSA B354 Standards
• Identify the main hazards related to MEWP use
• List safe work practices for MEWPs
• List the required elements of a Safe Use Plan, including the site risk assessment and rescue plan
• Identify the required training for MEWP users, operators, occupants, and supervisors
• Describe the inspection and recordkeeping requirements for MEWPs

Duration: 0.25 Hrs

Course Level: Intermediate
Languages: English, French
Capability: Audio, Video

Aerial work platforms provide a temporary workspace as an alternative to ladders or scaffolding. They can be used to perform inspection, maintenance, or repairs. This course describes basic types of aerial work platforms and how to work with them safely. It provides an overview of safety requirements, controls, preparation, work rules, hazards, and other safety precautions related to elevated platforms. This course discusses vertical towers, articulating boom platforms, and extensible boom platforms. [course outline] Overview and Description of Equipment Aerial Work Platform Types 1 of 2 Aerial Work Platform Types 2 of 2 Equipment Requirements Controls Preparation Safe Work Practices 1 of 2 Safe Work Practices 2 of 2 Hazards Overview Overturning Falling Collisions Electrical Shock General Precautions 1 of 2 General Precautions 2 of 2

Learning Objectives

• Identify aerial work platform types
• Describe requirements for equipment and controls
• List considerations that must be taken prior to operating an aerial work platform
• List safe work practices
• Recognize existing hazards of aerial work platforms

Duration: 0.25 Hrs

Course Level: Intermediate
Languages: English, French
Capability: Audio, Video

Falling at work may not seem very dangerous, but falls are the leading cause of workplace injuries. They commonly cause cuts, bruises, broken bones, back injuries, sprains, and strains. Hazards that cause slips, trips, and falls can be controlled and eliminated if they are identified, reported, and corrected. This course describes common causes of slips, trips, and falls, how they can be prevented, and first aid procedures for fall injuries. [course outline] Causes of Falls: Slips Causes of Falls: Trips Falls Prevention Housekeeping Safe Walking Surfaces Footwear Safe Work Practices Stair Safety Ladder Safety 1 of 2 Ladder Safety 2 of 2 Mounting and Dismounting Vehicles Platforms 1 of 2 Platforms 2 of 2 Storage and Loading Dock Areas Slippery Surfaces and Bad Weather Hazard Identification and Reporting How to Fall First Aid

Learning Objectives

• Define “slips”, “trips”, and “falls”
• Identify common causes of slips, trips, and falls
• Identify ways to prevent slips, trips, and falls, including good housekeeping procedures
• List tips for walking on slippery surfaces, on stairs, and in bad weather
• List proper procedures for the use, placement, and care of ladders
• Describe steps to take when a slip, trip, or fall hazard has been identified
• Describe first aid steps for slip, trip, and fall injuries

Duration: 0.25 Hrs

Course Level: Intermediate
Languages: French
Capability: Audio, Video

Falling at work may not seem very dangerous, but falls are the leading cause of workplace injuries. They commonly cause cuts, bruises, broken bones, back injuries, sprains, and strains. Hazards that cause slips, trips, and falls can be controlled and eliminated if they are identified, reported, and corrected. This course describes common causes of slips, trips, and falls, how they can be prevented, and first aid procedures for fall injuries. [course outline] Causes of Falls: Slips Causes of Falls: Trips Falls Prevention Housekeeping Safe Walking Surfaces Footwear Safe Work Practices Stair Safety Ladder Safety 1 of 2 Ladder Safety 2 of 2 Mounting and Dismounting Vehicles Platforms 1 of 2 Platforms 2 of 2 Storage and Loading Dock Areas Slippery Surfaces and Bad Weather Hazard Identification and Reporting How to Fall First Aid

Learning Objectives

• Define “slips”, “trips”, and “falls”
• Identify common causes of slips, trips, and falls
• Identify ways to prevent slips, trips, and falls, including good housekeeping procedures
• List tips for walking on slippery surfaces, on stairs, and in bad weather
• List proper procedures for the use, placement, and care of ladders
• Describe steps to take when a slip, trip, or fall hazard has been identified
• Describe first aid steps for slip, trip, and fall injuries

Duration: 0.50 Hrs

Course Level: Intermediate
Languages: English, French
Capability: Audio, Video

This course covers some of the more important regulation requirements for supported scaffolds, as well as basic safe practices for working on or near these scaffolds. It is intended as an introductory or refresher course for construction and general industry workers who will be working on or near scaffold systems. [course outline] Types of Supported Scaffolds Height Hazards Injury Causes Design and Assembly Requirements Training Site Conditions Scaffold Footing 1 of 2 Scaffold Footing 2 of 2 Electric Shock Hazards Freestanding/Secured Height Restrictions Additional Supports 1 of 2 Additional Supports 2 of 2 Very Tall Scaffolds Load Capacity 1 of 2 Load Capacity 2 of 2 Platform Gap Requirements Platform Overhang Platform Planks Scaffold Tags Access 1 of 2 Access 2 of 2 Fall Protection Guardrails Personal Fall Arrest Systems 1 of 2 Personal Fall Arrest Systems 2 of 2 Falling Object Protection 1 of 2 Falling Object Protection 2 of 2 Reaching While Working Weather Inspection Changes and Adjustments

Learning Objectives

• Identify the main types of supported scaffolds
• List hazards associated with working on or near scaffolds
• List four main causes of scaffold injuries
• List scaffold training requirements
• List important scaffold safety regulations
• Identify and describe safe principles of supported scaffold assembly
• Describe safe work practices on supported scaffolds
• Describe fall prevention and protection for working on scaffolds

Duration: 0.50 Hrs

Course Level: Intermediate
Languages: French
Capability: Audio, Video

This course covers some of the more important regulation requirements for supported scaffolds, as well as basic safe practices for working on or near these scaffolds. It is intended as an introductory or refresher course for construction and general industry workers who will be working on or near scaffold systems. [course outline] Types of Supported Scaffolds Height Hazards Injury Causes Design and Assembly Requirements Training Site Conditions Scaffold Footing 1 of 2 Scaffold Footing 2 of 2 Electric Shock Hazards Freestanding/Secured Height Restrictions Additional Supports 1 of 2 Additional Supports 2 of 2 Very Tall Scaffolds Load Capacity 1 of 2 Load Capacity 2 of 2 Platform Gap Requirements Platform Overhang Platform Planks Scaffold Tags Access 1 of 2 Access 2 of 2 Fall Protection Guardrails Personal Fall Arrest Systems 1 of 2 Personal Fall Arrest Systems 2 of 2 Falling Object Protection 1 of 2 Falling Object Protection 2 of 2 Reaching While Working Weather Inspection Changes and Adjustments

Learning Objectives

• Identify the main types of supported scaffolds
• List hazards associated with working on or near scaffolds
• List four main causes of scaffold injuries
• List scaffold training requirements
• List important scaffold safety regulations
• Identify and describe safe principles of supported scaffold assembly
• Describe safe work practices on supported scaffolds
• Describe fall prevention and protection for working on scaffolds

Duration: 0.75 Hrs

Course Level: Intermediate
Languages: English, French
Capability: Audio, Video

Working at elevated heights presents a serious danger of falling. Falls can be caused by inattentiveness, slippery surfaces, working in awkward or out-of-balance positions, or insufficient training. This course highlights numerous methods of prevention and protection, including fall arrest systems, the equipment associated with fall prevention and protection systems, vertical and horizontal lifelines, as well as inspection and maintenance guidelines. This course also discusses associated topics such as the proper procedure for putting on a body harness, lifeline swing hazards, calculating fall space clearance, and harness suspension syndrome. [course outline] Primary Defenses Against Falls Employer Responsibilities Employer Responsibilities – Training Stairways 1 of 2 Stairways 2 of 2 Working/Walking Surface Guardrails 1 of 2 Working/Walking Surface Guardrails 2 of 2 Ladders Portable Ladders Fixed Ladders Ladder Safety Systems Scaffolds Scaffold Fall Protection Scaffold Guardrail Systems Personal Fall Arrest System Overview Body Belt and Body Harness Putting on a Body Harness 1 of 2 Putting on a Body Harness 2 of 2 Lanyards Overview Using a Lanyard 1 of 2 Using a Lanyard 2 of 2 Anchorage Points 1 of 2 Anchorage Points 2 of 2 Free-fall Distance Anchorage Point Location Vertical Lifelines Vertical Lifeline – Length Guidelines Vertical Lifeline – Swing Hazard Horizontal Lifelines 1 of 2 Horizontal Lifelines 2 of 2 Fall Arrest System Performance Fall Space Factors Calculating Fall Space Clearance Harness Suspension Syndrome Fall Protection System Rules Inspecting and Maintenance 1 of 2 Inspecting and Maintenance 2 of 2 Lift Equipment Requirements Scissor Lifts Personnel Baskets (Lift Truck-mounted) Personnel Baskets (Crane-suspended) Aerial Work Platforms

Learning Objectives

• Identify and describe types of fall protection systems, including best practices for their use
• Describe employer fall protection responsibilities, including training
• List in order the steps to put on a body harness
• Identify and describe different types of lanyards
• Describe different types of anchorage points
• Define free-fall distance
• Identify and describe vertical and horizontal lifelines
• List the calculation factors for determining fall space clearance
• List emergency action plan steps in case of a fall
• List inspecting and maintenance guidelines for fall protection systems
• List fall protection use guidelines in lift equipment

Duration: 0.75 Hrs

Course Level: Intermediate
Languages: French
Capability: Audio, Video

Working at elevated heights presents a serious danger of falling. Falls can be caused by inattentiveness, slippery surfaces, working in awkward or out-of-balance positions, or insufficient training. This course highlights numerous methods of prevention and protection, including fall arrest systems, the equipment associated with fall prevention and protection systems, vertical and horizontal lifelines, as well as inspection and maintenance guidelines. This course also discusses associated topics such as the proper procedure for putting on a body harness, lifeline swing hazards, calculating fall space clearance, and harness suspension syndrome. [course outline] Primary Defenses Against Falls Employer Responsibilities Employer Responsibilities – Training Stairways 1 of 2 Stairways 2 of 2 Working/Walking Surface Guardrails 1 of 2 Working/Walking Surface Guardrails 2 of 2 Ladders Portable Ladders Fixed Ladders Ladder Safety Systems Scaffolds Scaffold Fall Protection Scaffold Guardrail Systems Personal Fall Arrest System Overview Body Belt and Body Harness Putting on a Body Harness 1 of 2 Putting on a Body Harness 2 of 2 Lanyards Overview Using a Lanyard 1 of 2 Using a Lanyard 2 of 2 Anchorage Points 1 of 2 Anchorage Points 2 of 2 Free-fall Distance Anchorage Point Location Vertical Lifelines Vertical Lifeline – Length Guidelines Vertical Lifeline – Swing Hazard Horizontal Lifelines 1 of 2 Horizontal Lifelines 2 of 2 Fall Arrest System Performance Fall Space Factors Calculating Fall Space Clearance Harness Suspension Syndrome Fall Protection System Rules Inspecting and Maintenance 1 of 2 Inspecting and Maintenance 2 of 2 Lift Equipment Requirements Scissor Lifts Personnel Baskets (Lift Truck-mounted) Personnel Baskets (Crane-suspended) Aerial Work Platforms

Learning Objectives

• Identify and describe types of fall protection systems, including best practices for their use
• Describe employer fall protection responsibilities, including training
• List in order the steps to put on a body harness
• Identify and describe different types of lanyards
• Describe different types of anchorage points
• Define free-fall distance
• Identify and describe vertical and horizontal lifelines
• List the calculation factors for determining fall space clearance
• List emergency action plan steps in case of a fall
• List inspecting and maintenance guidelines for fall protection systems
• List fall protection use guidelines in lift equipment

Duration: 0.50 Hrs

Course Level: Intermediate
Languages: English, French
Capability: Audio, Video

Learning Objectives

• State the general construction of ladders
• Differentiate between the types of ladders
• Select a ladder appropriate for accessing a work area
• Set up a correct ladder height and pitch
• Identify equipment damage and proper ladder functionality
• Define proper ladder storage and maintenance
• Identify safe ladder setup locations on a worksite

Duration: 0.50 Hrs

Course Level: Intermediate
Languages: French
Capability: Audio, Video

Learning Objectives

• State the general construction of ladders
• Differentiate between the types of ladders
• Select a ladder appropriate for accessing a work area
• Set up a correct ladder height and pitch
• Identify equipment damage and proper ladder functionality
• Define proper ladder storage and maintenance
• Identify safe ladder setup locations on a worksite

Duration: 0.50 Hrs

Course Level: Intermediate
Languages: English
Capability: Audio, Video

Learning Objectives

• Define “slips,” “trips,” and “falls”
• Identify and describe three types of STF prevention inspections
• Identify who should perform STF prevention inspections
• Identify common STF hazards
• List housekeeping procedures and safe work practices that can help prevent STF hazards and incidents
• List items which should be included in inspection checklists

Duration: 0.48 Hrs

Course Level: Intermediate
Languages: English, Spanish, Arabic, Portuguese, Chinese, Dutch, French, German, Italian, Japanese, Polish, Russian, Swedish, Czech
Capability: Audio, Video

Learning Objectives

• Define “slips,” “trips,” and “falls”
• Identify common causes of slips, trips, and falls
• Identify ways to prevent slips, trips, and falls, including good housekeeping procedures
• List tips for walking on slippery surfaces, on stairs, and in bad weather
• List proper procedures for the use, placement, and care of ladders
• Describe steps to take when a slip, trip, or fall hazard has been identified
• Describe first aid steps for slip, trip, and fall injuries

Duration: 1.05 Hrs

Course Level: Intermediate
Languages: English, Spanish, Arabic, Portuguese, Chinese, Dutch, French, German, Italian, Japanese, Korean, Tamil, Polish, Russian, Thai, Czech
Capability: Audio, Video, MobileReady

Learning Objectives

At the end of this course, you will be able to:

• Identify and describe types of fall protection systems, including best practices for their use
• List, in order, the steps to put on a body harness
• Identify and describe different types of lanyards
• Describe different types of anchorage points
• Define “free-fall distance”
• Identify and describe vertical and horizontal lifelines
• List the calculation factors for determining fall space clearance
• List emergency action plan steps in case of a fall
• List inspecting and maintenance guidelines for fall protection systems
• List fall protection use guidelines in lift equipment

Duration: 0.48 Hrs

Course Level: Intermediate
Languages: English, Spanish, Chinese, French
Capability: Audio, Video

Learning Objectives

At the end of this course, you will be able to:

• State the general construction of ladders
• Differentiate between the different types of ladders
• Select a ladder appropriate for accessing a work area
• Set up a correct ladder height and pitch
• Identify equipment damage and proper ladder functionality
• Define proper ladder storage and maintenance
• Identify safe ladder setup locations on a worksite

Duration: 0.25 Hrs

Course Level: Intermediate
Languages: English
Capability: Audio, Video

Learning Objectives

• Describe best practices to follow before mounting heavy equipment
• Define “three points of contact”
• Describe how tools and other items should be brought into or onto heavy equipment
• List safety guidelines when mounting and dismounting heavy equipment

Duration: 0.50 Hrs

Course Level: Intermediate
Languages: English, French, Spanish
Capability: Audio, Video

Learning Objectives

• Dangers of supported scaffolds
• Safe principles of supported scaffold assembly
• Safe work practices on supported scaffolds
• Fall protection devices
• Important safety regulations

Duration: 0.50 Hrs

Course Level: Intermediate
Languages: English
Capability: Audio, Video, MobileReady

Learning Objectives

By the end of this course, you will be able to:

• Define walking and working surfaces
• Describe requirements for aisles, stairways, guard rails and fall protection systems
• Identify areas within and outside of OSHA compliance
• Develop solutions to avoid injury

Duration: 0.50 Hrs

Course Level: Intermediate
Languages: English
Capability: Audio, MobileReady

Learning Objectives

At the end of this course, you will be able to:

• Describe the importance of ladder safety
• Identify common causes of ladder accidents
• Discuss proper labeling of ladders
• Analyze how to ascend, descend, and work on ladders safely
• Explain how to maintain, store, and transport ladders properly
• Evaluate the OSHA regulations for ladder safety

Duration: 1.00 Hr

Course Level: Fundamental
Languages: English
Capability: Audio, MobileReady, Responsive

Each year, on average, between 150 and 200 workers are killed and more than 100,000 injured because of falls at construction sites. OSHA’s construction industry safety standard for fall protection 29 CFR, Subpart M, outlines systems and procedures designed to prevent employees from falling off, onto, or through working levels and to protect employees from being struck by falling objects. Here, we outline the basics and provide some “do’s” and “don’ts” for novices and those who need a refresher course.

OSHA recommends Outreach Training Program courses as an orientation to occupational safety and health for workers. Workers must receive additional training, when required by OSHA standards, on the specific hazards of their job.

Please note: This course is not a part of the OSHA 10 Hour Construction Program.

Learning Objectives

Terminal Objective: Given current OSHA and industry information regarding construction worksite illnesses, injuries and/or fatalities, the student will be able to recognize fall hazards in construction. Specifically, the student will be able to:

• Identify major fall hazards
• Describe types of fall hazards
• Protect him/herself from fall hazards
• Recognize employer requirements to protect workers from fall hazards

Duration: 2.00 Hrs

Course Level: Intermediate
Languages: English
Capability: Audio, Video, MobileReady

Each year, on average, between 150 and 200 workers are killed and more than 100,000 injured because of falls at construction sites. OSHA’s construction industry safety standard for fall protection 29 CFR, Subpart M, outlines systems and procedures designed to prevent employees from falling off, onto, or through working levels and to protect employees from being struck by falling objects. Here, we outline the basics and provide some “do’s” and “don’ts” for novices and those who need a refresher course.

Learning Objectives

• Describe various types of ladders and their ratings.
• Explain how to select the proper ladder for the job.
• Explain how to use a ladder safely.
• Describe general safety precautions associated with stationary, or fixed scaffolds.
• Describe the assembly, use, and disassembly of a systems scaffold.
• Describe the assembly, use, and disassembly of a tubular welded frame scaffold.
• Describe the basic components and operation of a pneumatic scaffold.
• Describe the basic components and operation of a hydraulic scaffold.